GCU - 105

Description :

GCU-105 is a Single / Three Phase AUTOMATIC / MANUAL Generator controller module. It controls Start-Stop function of the engine, monitors the generator operation. It is designed by taking great care related with electromagnetic interference for trouble free operation in harsh electrical environment (As per ‘CE’ norms.).
Advanced single chip micro-computer protects the GEN-SET against malfunctioning. In case of Mains Failure / Over Voltage / Under Voltage / Lack of Grid Voltage, GCU-105 initiates an automatic GEN-SET start cycles & transfer the load from mains to the generator by switching the generator contactor.
It is possible to select start attempts with both crank & rest period. On restoration of mains the load will be automatically transferred to mains and the GEN-SET will stop after a cool down time. In case any fault occurs the alarm is activated and Displayed on LCD display and GEN-SET gets stopped.

Specifications	Features	Control & Fault inputs with front panel visual indication
SUPPLY- 8V to 32 V	Compatible for 1Ø & 3 Ø (Mains & D.G.)	Mains supply ON
Maximum Current-Operating Current 500mA Stand By Current 300mA	Built in KWH, Power Factor, Voltage, Current, Frequency meter.	Mains contactor ON
Input Voltage-AC 90V to 300Volts @ 50Hz (Ph - N) DC 24 Volt max.	Single chip micro-processor based design.	DG supply ON
Operating Temperature: 0ºc to 70ºc	12 Digital inputs and output. (Programmable - 5 I/P & 8 O/P )	DG contactor ON
3 Level Password Protection	Programmable 3 Analog inputs from Engine side.(Oil/Temp./Fuel)	Battery low voltage
Detailed Report Generation	AUTO, MANUAL, TEST & Periodic Test operating mode	Low oil pressure
	External remote Start / Stop input	High engine temperature
	LED alarm indications	Generator fail to start
	In-built Start / Stop delay	Low fuel level
	In-built RS232 Serial communicator for GSM & CDMA Modem.	Generator over speed fault
	Display of DG Voltage, current, frequency & KWH.	Emergency Stop
	Display of Date & time.	Alarm indication
	Display Power Factor
	Display of Fault Log Data, DG Start-Stop events
	RTC based Runtime / Rest time.
	Display of the DG Battery Voltage.
	CT Ratio programmable.

GCU - 105

Description :

Genset controllers GCU series

GCU - 107

GCU - 105

GCU - 104

GCU 101

Styling

Layout